Keyboard shortcuts

These are the default keys. Change them in Settings, under Keys.

3 min read7 sections
On this page
  1. Screens
  2. Strips and selection
  3. Clearances
  4. Tower cab
  5. Tower cab without a numpad
  6. Radio
  7. Simulation

Screens

#
Screens
ActionDefault key
Surface
Approach
Schedule
Ramp
Met
Pop out or dock the screens
Centre the stage on the selected aircraft
Whole field / default range
Range in
Range out
Move the selected aircraft's label
Aircraft silhouettes on the Surface, on or off
Settings
End the session and return to the HubNo default key
Shared session…No default key
Terminal scopeNo default key
Next stage layoutNo default key
Work in the next pane of the stageNo default key
Stage layout: GroundNo default key
Stage layout: TowerNo default key
Stage layout: DeliveryNo default key
Stage layout: Tower cab + TRACONNo default key
Stage layout: TRACONNo default key
Acknowledge the new ATISNo default key
Session debriefNo default key
Debug mode: turn on or off
Debug mode: mark a problem

Strips and selection

#
Strips and selection
ActionDefault key
Issue the strip's next clearance
Commands for the selected aircraft
Command line
Next crew waiting on you
Previous crew waiting on you
Previous strip
Next strip
Previous bay
Next bay
Cancel (menu, map pick, command line, selection)
Edit gates for the selected aircraft's airlineNo default key

Clearances

#
Clearances
ActionDefault key
IFR clearance
Start-up approved
Pushback
Tug back / push the other way
Taxi (to the runway, or to the gate)
Taxi via…
Hold position
Continue taxi
Hold short
Cross the runway
Give way
Expedite
Reduce speed
Turn around
Line up and wait
Cleared for take-off
Cancel take-off
Intersection departure…
Vacate via…
Continue approach
Minimum approach speed
Cleared to land
Go around
Assign runway…
Assign gate…
Hand off (frequency change)
Stand by
Remove the aircraft

Tower cab

#
Tower cab
ActionDefault key
Cab view (steps through your saved views)
Binoculars on the selected aircraft
Runway view
Walk around the selected aircraft
Exterior view
Follow from where you are
Free camera (hands the camera back to the simulator)
Orbit left
Orbit right
Orbit up
Orbit down
Camera zoom in
Camera zoom out
Camera up (hold)
Camera down (hold)
Save view as a cab viewNo default key
Save view as a runway viewNo default key
Binoculars on the next crew waitingNo default key
Walk around the next crew waitingNo default key
Camera panel: show or hide

Tower cab without a numpad

#
Tower cab without a numpad
ActionDefault key
Cab view (steps through your saved views)
Runway view
Binoculars on the selected aircraft
Walk around the selected aircraft
Free camera (hands the camera back to the simulator)
Orbit left
Orbit right
Orbit up
Orbit down
Camera zoom in
Camera zoom out
Camera up (hold)
Camera down (hold)

Radio

#
Radio
ActionDefault key
Push to talk
Talk on the frequency (shared session)
Voice or click input
Listen to Delivery on or offNo default key
Listen to Ground on or offNo default key
Listen to Tower on or offNo default key
Listen to Approach on or offNo default key
Listen to Departure on or offNo default key
Transmit on Delivery: arm or disarmNo default key
Transmit on Ground: arm or disarmNo default key
Transmit on Tower: arm or disarmNo default key
Transmit on Approach: arm or disarmNo default key
Transmit on Departure: arm or disarmNo default key

Simulation

#
Simulation
ActionDefault key
Freeze or run the simulation
Simulation rate down
Simulation rate up